Furniture Plans

Furniture plans as well as plans to build Ford Woody ,Fire Truck , Covered Wagon and Roll Top Desk (advanced level projects), also full size woodworking plans to build hall butlers, plans for dresser and hall mirrors, and cheval mirror plans. We also have plans for a nautical lamp, desk plans, bookcase plans, magazine rack plans, workbench plans and more.
Clock plans and clock dials and movements can be found on the Clock Plans / Units page above

Full size plans to make classic Ford Woody, Fire Truck and Covered Wagon.
These plans are our most challenging and advanced intricate model patterns.
These are intended for the advanced level crafter. You will need to make most details though
we do have trim packs to help. See below for more info.

Whimsical Serving Butlers
A B C D
Full size plans to easily build and paint this humorous butlers.
Great for dining room, hallway and parties. Each figure stands about 33 inches tall.
A...Plan #461 $4.95 Hostess
B...Plan #467 $4.95 Bellhop
C...Plan #466 $4.95 Maid
D...Plan #468 $4.95 Santa

Use our full size plan to build this heirloom classic country old time ice-box.
Our ice box plan features 3 doors as well as a lift up lid which reveals a laminate lined
surface ideal for food prep or mixing drinks. The icebox measures 32" x 17" x 34" high.
Our ice box plan is totally full size and probably the most complete and detailed pattern
you can purchase to construct an ice-box. We offer a hardware pack which is solid brass
hardware containing 6 hinges, 3 latches and a nameplate as shown below. The hardware
features vertically mounted latches as shown below, though the latches shown to the left are horizontal mount.
We have found the vertical mount to be a better design, less prone to break and easier in use.
Plan # 337 Ice Box $14.50

Ice box hardware pack contains 1 nameplate, 6 hinges (3/8" offset) and 3 latches
2 for left hand and 1 for right hand door. Solid brass.
#61124 Ice Box Hardware $47.95
****************************************************************

Build this heirloom cedar blanket chest (also called a Hope Chest) using our plan.
The top is hinged to store clothing. The front doors and drawers are decorative allowing an expansive
storage area under the lid which you can upholster or leave as solid wood. The detailed pattern will allow
you to build this cherished piece of furniture. A fine project for mid-level woodworkers.
The trim pack has polished brass chippendale pulls, handles and lid support.
Size of this blanket chest project is 18" x 49" x 23" high.
Plan #361 Blanket Chest $ 8.50
Trim #19361 $35.95
***********************************************

Full size plan #241 Dry Sink is a favorite. Using our detailed plan you can build this drysink which is a
fine addition to the kitchen, dining or living room. Features classic colonial styling.
Very useful with door and drawer storage below, large "sink" area, and
top shelf with pull down storage below.
This is both an attractive as well as useful unit. Complete details below.

With our detailed plan, you can build this fine bench which features a sitting area, a large storage area below, and handy shelf for phone. Called a gossip bench because you can sit down on it and gossip away the day. Trim pack has spindles, knobs, and door hinge. ( Lid hinge is not included.... use piano hinge available locally.)
Size is 16" x 42" x 31" high.
Plan # 309 Gossip Bench $8.50
Trim # 19309 $22.50
**************************************************************************************************

Full Size Plan #311 to build this Heirloom Roll Top Desk is detailed below.
This roll top desk plan is an advanced project, full featured with pullout slides, file storage drawers, an
abundance of storage "cubbies" as well as a top shelf. Shown here open...view it closed with the elegant tambour below.
*****************************************

Roll Top Desk
Project plan to build this roll top desk which is ideal for smaller spaces.
This handsome desk can fit most anywhere as it measures 30" x 20" x 42".
it features a large center drawer, ample work surface with drawers and letter slots above
as well as a pull down tambour. Plan #127 Roll Top Desk $9.95
*****************************************************

Armor Crafts Plan #248 Bookcase Plan is very easy to construct with the full size plan.
This useful design can fit most anywhere and features 3 shelves for plenty of storage.
A fine project for entry level woodworkers, it will also be enjoyed by advanced crafters.
Size 36" x 48". More details below.
Plan # 248 Book Case Plan $6.95
************************************************************

Trestle Table/ End Table Plan
Use our woodworking pattern #288 to build this fine trestle / end table. It makes an ideal TV stand, side table
or even a small coffee table. It features a shelf below to store books, This piece measures 28" x 18" x 23" high.
Plan #288 Trestle Table Plan $5.95
***************************************************

Slant Top Desk Plan
Full size plan to build this desk, often called a Captains Desk. This woodworking project
features four large drawers, a roomy desk top for reading or writing that hinges up for storage below.
The top also has an elegant gallery rail on top for storage. The desk is 21" x 25" x32".
the available trim pack has spindles for the rail, hinges for the lid, knobs and catches for the drawers.
Armor Crafts Plan #354 Captains Desk $9.95
Trim # 19354 $21.25 (Maple Spindles)
Trim # 18354 $22.60 ( Oak Spindles )
**********************************************

Classic Quilt Rack
Full size plan to build this attractive, yet easy to make quilt rack.
Features 3 levels from which to hang quilts for display. Heart cutouts add to the
country charm. Size is 9" x 37" x 36". Plan #149 Quilt Rack $4.95
***********************************************

Our mirror candle holders and colonial butter churn are fine projects for the scroller.
These handsome wall hangings make great additions to the den or hallway
and are lots of fun to build.Fine designs to create with either scroll or fret saw.
Sizes range from 34" to 12-1/2". Make from common 3/4" pine.
Plan #262 $4.95
*****************************************

Colonial Milk Stool
Our design of a colonial era stool that is used for milking the cows, and when done hang it back
on the wall with hanging hole at top. Makes a very attractive period piece by the fireplace or the hallway.
Construction uses very thick stock which you may need to glue up to achieve , (1-1/8, 1-1/4&1-3/4).
For easier construction, lathe turn the legs. No matter how you build it,
this is a real piece of Americana. Overall height is 37". Seat is 16".
Plan # 231 Milk Stool $3.95
************************************************

Pedestal Desk Plan
Full size plan to build this colonial style desk, is a simple but rewarding and useful project.
It features an expansive work surface with cubby hole slots and a large storage shelf above the desk.
Styled to look like 3 small drawers, actually it is one very large drawer below the desk top.
Drawer construction is simplified as no rabbets are needed.
This desk will be a welcome addition to the den , office, library or bedroom. Size is 25" deep x 42" long.
Armor Crafts Plan # 250 Desk $7.95
***************************************************

Desk Plan #210
An attractive desk project you can build with our plan, this desk features
an ample work surface, four roomy drawers: one of which can hold file folders
and a very useful book shelf. Size is 48" x 17" x 30" high.
Armor Crafts Plan # 210 Desk Pattern $7.95
********************************

Secretary Desk Plan
Use our Secretary Desk plan to build this elegant desk which features four drawers in base,
a drop down lid for reading and writing, and a three shelf book rack above.
An elegant shaped crown at the top is easily constructed following our
method using a saber saw and router as detailed on the plan.
Size is 26" x 16" x 75" high.
Armor Crafts Plan #209 $7.95 Secretary Desk
******************************************

Table Top Server
Plan to make this swivel server is full size. This is a great piece to hold all your spices and since
it swivels it makes access to them very easy. Fine for the center of dining table and great to use
on the picnic table. The trim pack has lasy susan swivel and spindles. Size is 14" diameter.
Armor Crafts Plan # 827 $2.95 Table Server
Trim #19827 $4.00 ( Maple spindles )
Trim # 18827 $5.50 (Oak Spindles )
****************************************

Coffee Table Plan
Use our plan to make this coffee table designed to take plenty of use. It is constructed of
thick stock and is easy to make. It features a large storage shelf below.
drawers are decorative Size is 16" x 20" x 44".
Armor Crafts Plan #260 $3.95 Coffee Table
************************************

Bookcase Plan
Use our plan to build this attractive bookcase that features a large storage area above, which can hold books
or plants etc. and a shelf below for books. Slim depth allows it to fit anywhere and also makes a
nice dividing piece in a room. Size is 10" x 35" x 32" high.
Plan # 290 $6.95 Planter Bookcase
***********************************************

Magazine Rack Plan
Full size plan to construct this attractive magazine rack which can
hold your favorite magazines and papers.
Easy to build. Has 3 levels for storage.
Plan #249 $5.95 Magazine Rack
*******************************

Bench Plan
Use our full size plan to build this sitting bench, ideal for for cozying up to the fireplace,
in the den or as a stepstool or kiddy bench. This attractive colonial style bench is made
from 1-1/8" pine. It measures 12-1/2" x 28" x 12-1/2" high.
Plan #287 $6.95 Colonial Bench Plan
********************************

Plant Stand Plan
Plan to build this 3 tier planter stand to hold your plants. Ideal for a sunny spot in your home.
Does not require much space yet it can hold many plants. Size is 38" x 39".
Allows you to create green garden anywhere.
Plan #495 $7.95 Plant Stand
*******************************************

Hall Butler Bench Plan
Detailed pattern to construct a hall bench that features a mirror, coat hooks, seating
and storage as well as a useful shelf. This fine project will make a grand addition to your foyer.
Size is 20" x 54" x 78" high. The available trim package has 3 brass and porcelain coat hooks,
ceramic drawer pulls and lid support for the bench. You will need to supply a piano hinge for the lid.
Plan #33118 $8.95 Hall Butler Bench
Trim #19118 $20.50
**************************************

Valet Mirror Plan
Use our detailed plan to make this dresser top valet with mirror. This fine woodworking project is easy
to build and very useful. The mirror swivels and features a drawer below for storage.
A fancy wood overlay is applied on top for style. The available trim pack contains drawer knobs,
mirror swivel hardware and the wood overlay. Size is 16" x 8" x 22" high.
Plan #492 $4.99 Dresser Top Mirror Plan
Trim # 19492 $8.45 (Birch Overlay)
Trim #18492 $8.85 (Oak Overlay)
************************************

Workbench Plan
Every wood shop needs a work bench. Our plan to build this workbench is easy as
it uses 2x4 framework. The worktop is also made from 2x4's (bolted on edge) for strength.
Features 2 drawers and 2 doors for storage below
the work surface. Size is 22" x 59" x 34" high.
Plan #263 $3.00 Workbench
**********************************

Lathe Project Plans
Wood Turning Patterns
Wood project patterns below require lathe work to construct.
The lathed turned pieces are shown full size.
Lathe Project Patterns.

Classic Hall Tree Plan
Use our project plan to make this Hall Tree which features a large mirror, umbrella slots on each side
a shelf above and a large storage shelf below. You can flank the mirror with coat hooks as shown.
Size 24"w x 14"d x 78" high.
Plan #360 Hall Tree $7.50

Cheval Mirror Plan
Use our plan to construct this elegant Cheval Mirror for bed or bath.
It stands over 60 inches tall. Mirror designed to swivel for adjustment.
Size is 24" x 71" x 17" deep.
Plan # 121 Cheval Mirror $7.95

Candle Stand Plan
Create this turned table with our woodturning project plan.
A fine project plan for woodturning, this attractive piece is fine beside your
favorite chair or in a corner to hold a book.
Size is 16 " diameter x 25" high.
Armor Crafts Plan #243 Candlestand Plan $3.95

End Table Plan
Use Armor Crafts woodworking plan to build this elegant End Table.
You need to lathe turn the husky spindles, A fine piece for the den with storage below
for books and a 15" x 30" table top above. Height is 23 inches.
Armor Crafts Plan #251 End Table Plan $4.00

Spinning Wheel Plan
Armor Crafts plan to build a spinning wheel is strictly for the wood-spinner,
Though wool spinners seem to love the end result.
This working spinning wheel demands a lot of lathe work to build.
The big wheel is glued up in 4 sections and turned on the outer face plate.
A wood lathe project for the ultimate wood turner.
The main wheel measures 22" diameter. Overall size 22" x 30" x 38".
Plan # 247 Spinning Wheel Plan $6.95

Butcher Block Table Plan
This lathe project plan features a 5" deep rock Maple top designed
to last forever. A laminated top coupled with the turned base legs makes
this a fine piece for the active kitchen. Size 24" x 24" x 36" high.
Plan #122 Butcher Block Table $7.95

Custom Engraved Brass Nameplates
Add a personal touch to your projects with our custom engraved brass nameplates.
We have 2 sizes available, easily attached with included screws.
All text is in capitals and block letters,
except Handcrafted By or Handcrafted For which is in script.
The 1/2" x 3 inch plate is available with one line of text.
The 1" x 3 inch plate is available with 3 lines of text.
When ordering, please write out exactly what you want on each line.
Maximum of 26 characters/spaces per line.

Giant Carbon Paper
To easily trace patterns onto lumber, try using carbon paper.
Our large format paper is 22 inches x 16 feet.
#98011 Carbon $5.95