 |
Blinker bulbs are 7 watt, fit candleabra socket sets (
see 40051 & 40040 below ),
they randomly blink and are great for ceramics, wood craft projects, holiday
displays etc. |
 |
Blinker bulb, candleabra base fits candleabra
sockets. Blinks randomly.
#40052 Red 75¢ each 10 for $6.00
|
 |
Blinker bulb, candleabra base fits candleabra
sockets. Blinks randomly.
#40053 Green 75¢ each 10 for $6.00
|
 |
Blinker bulb, candleabra base fits candleabra
sockets. Blinks randomly.
#40054 Amber 75¢ each 10 for $6.00
|
 |
Blinker bulb, candleabra base fits candleabra
sockets. Blinks randomly.
#40055 Blue 75¢ each 10 for $6.00
|
 |
Blinker bulb, candleabra base fits candleabra
sockets. Blinks randomly.
#40056 Clear 75¢ each 10 for
$6.00 |
 |
Cord Set/Plug
Lamp cord set with attached plug is 8 feet long.
UL listed and polarized plug.
#40009 Cord Set/Plug $3.75 $30/10 |
 |
Cord Set With Switch/Plug
Lamp cord set with inline on-off switch is 8 feet long. White.
#40023 Cord Set /Plug/Switch $4.75 $39/10 |
 |
Cord Set/Switch/Socket/Plug
White 6 foot set has plug, switch and candelabra socket
with snap in socket. Fits 1" dia. hole.
#40051 Cord/Plug/Switch/Socket $3.95 $30/10 |
 |
Cord Set/Switch/ 3 Sockets/ Plug
White 8 foot set has plug, switch and 3 candelabra sockets {6" spacing}.
Snap in hole sockets fit 1" diameter hole. Ideal for wood and ceramics.
#40049 Cord/Plug/Switch 3 Socket $7.25 $65/10 |
 |
Night light housing accepts candleabra base bulbs. Has
polarized plug,
on-off switch and clip. You can mount with adhesive your own scroll sawn
shade deigns onto the clip.
#40060 Nightlight $2.95 |
 |
Bottle Lamp Kit
Easily turn your favorite bottle into a lamp with this kit.
As shown, it contains the side outlet socket, with wire plug set and the
cork
for setting into neck of bottle. You may also want to order a shade adaptor
as shown below.
#40097 Bottle Lamp Kit $7.25 |
 |
Shade Adaptor
This shade adaptor simply clips on a standard bulb and
allows you to fasten a shade onto the threaded portion.
#40099 Shade Adaptor $1.75 |
 |
Mason Jar Lamp Hardware Kit
Use this kit to transform your mason jar into a lamp.
You supply the mason jar, light bulb and shade ( you may need to also
order a shade adaptor shown above ) The lid and lamp hardware are brass
finished.
#40098 Mason Lamp Kit $8.95 |
 |
Candle / Lamp Post Kit
This kit contains a bulb and socket fastened into a plastic tube
that is pre-wired to a plug with an inline switch.
Often used in holiday candle and lamp post decorations.
#40094 Lamp Post Kit $6.95 |
 |
Standard Socket
Brass finish standard light bulb socket.
UL Listed, max 250 watts.
#40025 Push Pull Socket $2.95 ea. $24/10 |
 |
3 Way Socket
Brass finish standard socket for 3 way bulbs.
UL Listed, max 250 watts.
#40035 Socket 3 Way $3.50 ea. $29/10 |
 |
Lamp Harps
These brass finish 2 piece lamp harps feature a removable base for lamp
assembly as well as a swivel tread top for fastening shades and finials.
Two sizes available
#40016 Size 8" $1.40 ea.
#40017 Size 11" $1.65 ea |
 |
Brass Finial
Brass finial is used on top of harp to hold shades.
#40018 Finial $1.25 |
|
Important |
A quick tip about lamp pipe hardware terms. The standard
lamp pipe measures 3/8" outside diameter (OD). This size
is referred to in the industry as 1/8 IP.
All our extensions: straight/offset as well as threaded pipe measures
3/8" OD.
For this hardware to pass through a hole in wood, the hole should be
just slightly larger than 3/8" diameter (7/16 or larger). |
 |
Brass Plated Extensions
Smooth Brass plated lamp pipe extensions with threads at top and bottom.
3/8 inch diameter (OD) 1/8 IP. You can run lamp wire through these pipes.
#40090 size 5" $2.25
#40091 size 8" $2.95
#40092 size 11" $3.40
#40093 size 14" $3.95 |
 |
Offset Lamp Pipe Extension Brass Plated
Extension has approx. 2-1/2" offset. Threaded at top and bottom to accept
fastening washers, nuts, sockets and harps. Hollow pipe allows lamp wire to
pass through.
#40070 size 10" $2.95
#40071 size 15" $3.95 |
 |
Brass Plated Two Piece Adjustable Extension for
Lamp
Adjustable in height from 10" to 15". Threaded top and bottom and includes
nuts and washers for fastening. Lamp cord can pass through the hollow pipe.
The OD of the bottom pipe is 1/2". #40069
Adjustable Offset $9.50 |
 |
Threaded Lamp Pipe All thread lamp
pipe (nipple) is 3/8" OD.
#40081 Size 1" 15 cents
#40082 Size 2" 30 cents
#40086 Size 6" 75 cents
#40006 Size 12" $1.79
#40008 Size 36" $4.50 minimum
shipping fee for 36" pipe is $7.95 |
 |
Extra Long Drill Bit
Hardened steel auger bit for wood is 3/8" diameter x 18 inches long.
#D2217 Drill Bit $15.95 |
 |
Coupler
Use this internally threaded brass coupler to to join together lamp
pipe to make the desired length. The coupler is 7/16" OD x 5/8" long.
#40080 Coupler 65 cents each |
 |
Hex head nuts fit the thread of lamp pipe (1/8IP).
Hex Nut #40015 10 cents each $7/100 |
 |
Knurled brass nuts fit the thread of lamp pipe
(1/8IP)
Knurled Nut #40079 1/2" Dia. 35 cents ea.
$22/100
Knurled Nut #40078 3/4" Dia. 35 cents ea.
$27/100 |
 |
Palnuts fit the thread of lamp pipe (1/8IP)
Palnut combo nut/washer #40077 15 cents ea.
$9/100 |
 |
Serrated lock washers slip over the thread of
lamp pipe.
Lock Washer #40074 5 cents ea. $4/100 |
 |
Washers slip over the thread of lamp pipe.
Washer Size 3/4" OD #40076 15 cents ea. $10/100
Washer Size 1" OD #40075 15 cents ea. $10/100 |
 |
Lamp Neck
Brass plated neck is ideal to cap off a turned wood or ceramic lamp.
It measures 1-1/2" w x 1" high. Hole allows lamp pipe to pass.
#40019 Lamp Neck $1.20 |
 |
Satin Brass Cap
Use vase caps on turned or ceramic lamps. Has 3/8" diameter center hole.
Size is dia.
#VCA1 Size 1-3/8" $2.95
#VCA7 Size 3" $4.25 |
| |
|
