|
Home
Cradle & Horses
Kids Furniture
Toy Plans
Display Pieces
Furniture Plans
Outdoor Plans
Holiday Plans
Clock Plans
Clock Units/Dials
Craft Eyes
Hardware
Lamp Parts
Metal Center
Music Boxes
Scroll Band Blades
Tools
Wood & Craft Parts
Pressed Wood
Specials
Order Form
| |
Specialty hardware hinges, catches, hasps, hangers, lid
supports, small brass knobs
and much more for your projects including boxes, clocks, chests, crafts, furniture and toys.
Unless noted, all hinges, catches, lid supports and hangers are supplied with
fasteners.
Hinges & Catches & Hangers
 |
Brass Plated Hinges
#78924 1-3/8" x 2" $7/10 $55/100
#78052 1" x 15/16" $5.25/10 $37/100
#78050 3/4" x 5/8" $4.20/10 $29/100 |
 |
Brass Plated Hinge
#78460 2" x 1-3/8" $7.50/10 |
 |
Decorative Brass Plated Hinge
Size 1-1/4" x 2-1/8".
#78088 $1/ea. $8/10
$32/50 |
 |
Box Hinge
Brass plated hinge, 3/4" x 1".
#78063 $4.50/10 $35/100 |
 |
The best hinge available for lids on toy boxes
and chests. Usually use 2 or more
hinges in combination with a lid support. This non-mortise hinge partially
wraps
around cabinet back and attaches to underside of the lid. For 3/4" stock.
#77059 Lid Hinge $2.95 each
10 pieces for $25.00 |
 |
Sewing Table Hinge
Also good for drop front desk.
Approx. size 1-3/16" x 3-1/4"
78209 $1.40 each |
 |
Black Hammered Hardware
Hinges are 3-1/2". Pull is 5" overall. Knob is 1-1/8" dia.
70027 Hinge 3/8 Offset $2.25/pair $90 / 50 pair
70025 Hinge Flush $2.25/pair $90 / 50 pair
70026 Pull $1.50
70024 Knob $1.20 |
 |
Non Mortise Furniture Hinges
Best hinge for fine furniture and cabinets. Only 1/16" thick, so no mortise
is required.
78096 Size 3" x 1-15/16" Leaf 1". #78096 $1.65 ea. $24/20
78095 Size 2" x 15/16". Leaf 11/16". #78095 .85 ea. $14/20
78094 Size 1-1/2" x 13/16". Leaf is 5/8" #78094 .80ea. $12/20
78006S Offset 2"x rabbet 3/8" $1.95 ea. $37/20 offset style
is for a 3/8 inset rabbet. |
 |
Non Mortise Stop Hinge
Same as the hinges shown above, but these stop at an angle of 125 degrees,
great for lids, boxes or where projecting moldings may cause interference.
78098 size 2-1/2" x 1". Leaf is 3/4" 78098 $1.75 ea. 78098 $29 /
20
78097 size is 2" x 15/16". Leaf is 11/16". 78097 $1.55 ea.
78097 $25 / 20 |
 |
Non Mortise Hinge / Finial Tip
Decorative hinge, 1/16" thick is 2" x 15/16. Leaf 11/16".
With finials the tip to tip size is 3 inch.
#78007 $1.50 each $25/20 $46/50 |
 |
Box Hinge Brass plated
stop hinge is 3" x 3/4". Opens to 95 degrees.
#W25060 $2.50 |
 |
Large ornate hinge is brass plated. Like all our hinges it is
supplied with screws. Size is 2-7/8" x 1-3/4".
B1564 $1.50 ea. $10/12 |
 |
Brass plated chest hinge opens 90 degrees. Heavy gauge with rolled
edge.
supplied with screws. Size 1-1/8" x 2-1/16".
#W25070 $ .95 (cents) |
 |
Light antique brass plated hinge for 3/8"
offset (rabbet) doors.
Size 1-1/2" x 2-1/2".
#61001 $3.25 |
 |
Cylinder Hinge
Solid brass, simply drill hole, insert barrels & turn set screw to open
wedge to lock hinge. For boxes and small doors. Use 10mm for for 1/2" stock
and 14mm for 3/4" stock. Sold per piece.
#25064 10mm $3.00
#25065 14mm $3.00 |
 |
Solid Brass Ice Box Hardware
Use our solid brass, functional hardware for your reproduction ice box and
kitchen cabinets. Hardware is designed for doors with a 3/8 offset The latch
shown is a Right Hand. Hinges on the right as you view door use a
Right Hand latch.
Nameplate #61510 $4.75
Hinge #61500 $3.95 each
Right Latch #61505 $6.50
Left Latch #61506 $6.50 |
 |
Butler Tray Hinge
Solid Brass. Locks at 90 degrees. Must be mortised in.
#78000 size 1-1/2" x 3" $8.50 each |
 |
Concealed pivot hinge for full inset
doors. Hinge mounts behind top and bottom edge of door, a bushing inserts
into frame member. Make bushing hole 11/32" from edge. No mortising
required. Screws not included. Size 1-3/16" x 3/4".
#78009 Pivot Hinge $3.79 |
 |
Solid brass flip top table hinge can fold
down flat over itself. Must be mortised.
Size 1/2" x 3". Screws included. Sold per pair.
#78001 Flip Top Hinge $11.99 |
 |
Brass plated snap catch is 7/8" x
1-1/2".
#24739 $2.25 |
 |
Brass plated clasp is 1-1/4" x 7/8" wide.
#25052 each 75 cents |
 |
Smaller brass plated clasp is 3/4" x 1"
wide
#78032 each 65 cents |
 |
Brass plated hasp with closing swing arm
is
3/4" x 1-7/8". #78031 $ 1.50 |
 |
Brass Snap catch for small box lids. Size
is 7/8".
Fastens with included nails.
#25099 $1.25 |
 |
Hook Catch
Brass plated hook catch with 2 screws. Avail. in 2 sizes.
#78078 size 1" 35 cents ea. $14/50
#78091 size 3/4" 35 cents ea. $14/50 |
 |
Brass plated pull tight lock for table
leaves, chests and
window sash. Size 2" x 2-1/2".
#24733 $1.89 |
 |
Button Magnet Catch
Super concealed magnet catch simply inserts into a 5/16" hole. Use with the
included strike or with just the screw as a strike. Great for doors, lids,
boxes etc. 9/16" hole depth. 6 pound rating. #75003 $1.25 ea.
$10 / 10 $85 / 100 |
 |
Slim Magnet Catch
Thin profile catch is small but strong.
Size 2" x 3/8" x 1/2".
75004 $2.50 ea.
$20/ 10 $70 / 50
$100 / 100 |
 |
Magnetic Touch Latch
Single barrel magnet latch is spring loaded. Press to spring door open,
barrel moves forward, press again to close. Surface mounts in any position.
#75005 $2.20 $18/10 |
 |
Double Door Touch Latch
Spring load magnet catch for double doors. Push door to open,
press it to close. With fasteners.
#75009 $2.75 ea.
$21/10 |
 |
Roller Catch
Antique finish steel case with rubber wheels
for quiet operation. Size 1-1/4" x 1-3/8"
UX510 ea. 59 cents |
 |
Friction 'Bullet' Catch
Spring loaded friction catch is brass plated.
Bullet inserts into hole, strike nails on.
#75000 size 3/8" 80 cents ea. $6 / 10 |
 |
Friction Lid Support
Brass plated lid support is 7 inches long. Friction washer controls slide.
Great for desks lids, chests etc. Not for toy boxes. Mounts left or right.
78012S $2.75 ea. $22 / 10 |
 |
Toy Box Lid Support
Anti-slam support has spring tension.
Prevents lid from slamming down. Length 5". Opens 85 degrees.
#77058 $3.95
$29 / 10 |
 |
Drop Leaf Support Hinge
Heavy gauge brass plated steel support hinge is ideal for drop front desks.
Must be mortised. Size is 7" x 3/4" wide. Priced per pair.
#61549 Desk Hinge $10.99 |
 |
Drop Leaf Support is 6". Positive spring action.
Nickel plated. Screw not included.
#78013 Drop Leap Support $3.95 each |
 |
Saw Tooth Hangers The
most versatile hanger for medium to light duty use
2 Sizes available. Large #74004 is 2-5/8".
Small # 74014 is 1-3/8" long.
74001 Large Hanger 74001 $8.00/144
$32/1000
74014 Small Hanger 74014 $7.25/144
$26/1000 |
 |
Heavy Duty Hanger
Size is 1/2" x 1-1/2 long. Supplied with fasteners.
74000 25 cents ea. $18.00/100
$95/1000 |
 |
Hangers
73716 Silver color medium duty hanger is 1/2" x 7/8".
73716 15 cents $20.00/144
74003 Brass plated triangle light duty hanger is 1/2" x 3/4"
74003 15 cents ea. $10/10 $59/1000 |
 |
Heavy Gauge Hanger
Brass plated hanger is 1/32 gauge. Heavy duty. Size 1-1/8 x 1-3/16 h.
With screws.
#74052 45 cents ea. $16.00 / 50 |
 |
Keyhole Wedge
Size 9/16" x 1-5/8". Wedge design for snug fit. 1/8" thick, mortise in
for flush fit.
Fasten with screws, not included.
#74015 $1/2 $9/25
$27/100 |
 |
Flush Mount Hanger
Tongues interlock to form a stable flush mount only 1/8" thick. Use for
vanities,
panels, mirrors etc. Zinc plated steel. Screws not included. Sold per
set, 1M / 1F.
#74002 $1.40 |
 |
Taper Wedge Hanger
Strong & concealed mounting. Only 1/4" depth. Screws not included.
Sold per set: 1 male/1 female.
73012 Size 2" #73012 $1.10
73016 Size 6" #73016 $1.45 |
 |
Bed Rail Fasteners
Heavy gauge steel for safe and secure fastening of bedrails to bedposts.
The hooks engage into the slots, must be mortised. Size 4 inch, set of 4
hooks/4 slot plates...enough for one bed. #73000 Bed
Rail Fastener $14.99 |
 |
KD Fitting Knock down fitting interlocks and is held
fast with metal joining plate.
Pieces can not disconnect unless plate is removed. Size 1-1/4". Screws not
included.
Sold per single set ( 2 joiners / 1 plate ). Two sets are shown in this
photo.
#77543 Knock Down $2.95 |
 |
Cup Hooks & Screw Eyes
Size listed is the overall length.
#HOOKB size 2-3/16" Cup Hook $4/50 $28/500 Brass Pltd
#76002 size 7/8" Cup Hook $5.00/100 $18/500 Brass Pltd
#74009 Screw Eye size 3/4" , hole 5/32 $5.00/100 Brass Pltd
#76009 Screw Eye size 3/4" , hole 5/32 $4.00/100 Nickel
Pltd
#74011 Screw Eye size 1/2" , hole 1/8" $5.00/100 Brass Pltd
#76011 Screw Eye size 1/2, hole 1/8" $4.00/100 Nickel Pltd |
 |
Ring Hangers
Swivel top ring hangers. Size is loop dia.
62306 Twist Antique 1-1/8" 65cents $10/25
74004 Twist Bright 1-1/8" 65cents $10/25
62308 Smooth Antique 1-1/8" 65cents $10/25
74005 Smooth Bright 1-1/8" 65cents $10/25
62309 Small Antique 3/4" 45cents $8.50/25
62307 Small Bright 3/4" 45cents $8.50/25 |
| Panel, Shelf & Swivel Hardware |
Included below are T nuts, swivel bearings, shelf supports,
glides and wire control. |
 |
Brace
Antique finish brace to reinforce corner joints.
Size 1-1/2" x 3/4". Screws not supplied.
Great for chairs, cabinets, tables and anywhere a stronger joint is needed.
77005 Brace 35 cents ea. $26 / 100 |
 |
T-Nuts
Zinc plated tee nuts with locking prongs provide a machine thread in wood.
Simply drill clearance hole for barrel & hammer in. Locks secure. Three
sizes are available.
Same price. 20 cents ea. $6 / 50
# 77530 1/4 - 20 #77531 5/16-18
#77532 3/8-16 |
 |
Cup Washers
Brass plated finish cup washers are ideal for thin stock applications. These
provide stability without need to countersink. $5/100 $18 / 500
77547 fits #6 screw
78028 fits #8 screw |
 |
Lasy Susan Swivels
Low profile ball bearing swivels are zinc plated for rust resistance. Only
5/16" thick for low profile. Weight rating is 300 lbs for 4" and 500 lbs for
6". Screws not included.
77518 4 " $1.85 $32/25
77519 6" $3.00 $25/10 |
 |
Heavy duty steel extension chassis with 10-1/4"
swivel. Ball bearing construction. Extends 8-3/4". Extension weight capacity
90 pounds. Screws not included.
Size 12-3/4" x 13" wide x 1" high. #78017 $42.00 |
 |
Shelf Supports Vinyl Clad
Brass plated metal shelf support with vinyl cladding. Fits 1/4" dia. hole.
#75013 Clad Support 20 cents ea. $8.50/50 |
 |
Shelf Pins & Grommets
Brass shelf support and receiving grommet are sold separately. Grommet fits
1/4" hole.
#78040 Grommet $2 / 10
#78041 Pin $2 / 10 |
 |
Spoon Style Shelf Support
Brass plated metal shelf support fits 1/4" dia. hole.
#77504 Shelf Support 20 cents ea. $7.00 / 50 |
 |
Nickel plated metal retainer clip is 13/16" long.
Attach with #2 FH screw (flush)
or # 6 pan head screw. Screws are not included, order from
below.
#77550 Panel Clip $2.50 / 100
#77550 Panel Clip $20/1000 |
 |
Brown plastic panel retainer button is 15/16" long.
Attach with #5 FH screw from below. Screws are not
included.
#77527 Panel Button $1.50/12
$9 / 100 |
 |
Tack Glides Nylon Tack Glide
Non mar nylon base with attached nail for easy installation. Use these nylon
tack glides on furniture. Size is 3/4" w x 3/4" total height, (nail is 9/16"
high).
#77540 Tack Glide 15 cents each $5/50
$24/500 |
 |
Adjustable Leveler Nylon Base Glide
Adjustable leg levelers feature a 1-1/4" dia. non-mar nylon base with a 2" h
stem.
Supplied with fastening T-nut. Use in the base of furniture and clocks to
level and elevate. Sold in sets of four pieces.
#77526 Leveler Set $3.90 10 sets
$32.00 |
 |
Shelf Pull Out Slide
Low profile, 9" long slide pulls open to 15". Size 3/8" x 1"
Mount side or bottom, capacity 15 lbs. Screws not included.
#78067 Slide $4.25 pair |
 |
Roller Glide
Use these roller glides to make an inexpensive feed table
for your saw. Roller is 3/4" wide. Screws not included. Also
make a great trunk caster.
#78145 Roller $1.00 |
 |
Table Lock
Two piece interlocking table lock to join table leaves.
Size 2" diameter. Screws not included.
#77006 Table Lock $2.79 |
 |
Dual Wheel Swivel Caster
Easy to make any project mobile, simply attach casters. Smooth rolling
impact resistant 2" black wheel with bright chrome finish hood. Plate mount.
Screws not included. 90 pound capacity. Sold per caster.
#76010 Caster Plate Mount $2.25 each |
 |
Hanger Bolt with nut. Size 3-1/2" x 5/16-18 #77003
55 cents each |
 |
Wire Grommet Size 1-3/4" outside diameter. Wire pass 1/2"
#GROM5 $3.75 Black
#GROM6 $3.75 White |
 |
Wire grommet size 3-1/2" OD x 2-1/8" OD. Wire pass 3/4"
#GROM7 $5.75 |
 |
Wire grommet size 3-1/2" OD x 2" OD. Wire pass 5/8"
#GROM8 $5.75 |
 |
Wire grommet size 2-1/4" OD. Wire pass 3/4". With
retractable hinged tab.
#GROM9 $4.99 |
 |
Tiny wood screws are used for many craft projects .
Brass plated phillips head wood screws.
#24520 #2 x 3/8 FH $5.95/100
#24530 #2 x 1/2 FH $4.95/100
#24523 #4 x 3/8 FH $3.95/100
#24537 #4 x 1/2 FH $5.95/100
#24525 #4 x 5/8 FH $3.95 100
#24527 #5 x 1/2 FH $6.95/100
#24529 #5 x 1 FH $6.95/100
#24538 #8 x 1/2 FH $8.95/100
-------------------------------------------
#83008 #2 x 3/8 RH $5.95/100
#83009 #2 x 5/8 RH $5.95/100
#24524 #4 x 5/8 RH $5.95/100 |
 |
Zinc plated pan head phillips wood screws.
Aggressive thread for strong pull.
#83040 #6 x 3/8 $2.20/100
#83042 #6 x 1/2 $2.20/100
#83043 #6 x 3/4 $2.75/100
#83044 #8 x 3/4 $2.95/100 |
Box & Decorative Hardware
Included in this hardware section are small brass knobs, brass
cabinet pulls, decorative
brass anchors, eagles, finials and corners to add the finishing touch to your
projects.
 |
Small Brass Knobs
Bright polished solid brass knobs, great for boxes, clocks, doors etc.
Supplied with both wood thread to install from front or machine thread to
install from rear.
61520 3/8 diameter $1.20 $10/10 $44/50
61521 1/2" diameter $1.35 $12/10 $50/50
61522 3/4" diameter $1.75 $16/10 $55/50 |
 |
Bracket Handles Perfect for the top of
clock cases. Non swivel.
#24411 Polished Solid Brass 1" x 1-1/4"w $4.40
#24412 Polished Solid Brass 1-1/2" x 2"w $8.50
#24705 Antique Finish 2" x 2-1/2" w $7.95 |
 |
Polished Brass Chippendale Pulls for furniture.
#B1170 Size 4" x 2-1/2", c to c 3". #B1170 $6.75
each $51.00/10
#B1171 Size 3-1/2" x 2-1/2", c to c 2-1/2". #B1171 $6.25 each
$45.00/10 |
 |
Polished Brass Swan Neck Pulls for furniture.
#B1126 Size 3" c to c $4.95 $41.00/10
#B1125 Size 2-1/2" c to c $4.60 $37.00/10 |
 |
Antique Colonial Pull Handsome pull for drawers is 2"
x 4-3/4".
Non swivel, fixed bail. Mounts from rear, hole spacing is 3".
#70003 Colonial Pull $3.95 ea. $35.00/10 |
 |
Drawer / Door Pull
Intricate design with an antique finish.
C to C is 3 inch. Size 5/8" w x 3-1/2".
#70011 Pull $1.00 ea. $9.50/10 |
 |
Pull Antique finish 5-1/2" long x 1/2" w.
Center to center is 3". #70004 $1.75 |
 |
Pull Antique finish 5" long x 7/16" w.
C to C 3". #70005 $1.75 |
 |
Pull Bright brass finish 5" long x 1/2" wide. C
to C 3". #70017 $2.50 |
 |
Antique Finish Pull
Elegant pull is 1-1/2" diameter.
#70016 Pull $1.00 ea. |
 |
Brass Pyramid Knob
Unique design brass "pyramid" brass knobs.
#B1262 size 1' dia. x 7/8" high $4.35
#B1263 size 1-1/4" dia. X 1" high $4.75 |
 |
Solid Brass Desk Hardware
Polished brass pulls are great for desks, cabinets etc
From top to bottom:
#B1130 $3.50 Drawer Pull size 3-5/8" x 3/4", 3" c to c.
#B1405 $2.20 Label Holder Pull size 2-1/4" x 7/8".
B1115 $4.75 Cup Pull size 3-3/4" x 1-1/8", c to c 3-7/16".
|
 |
Polished Brass Cup Board Latch
Surface mounted, so it is very easy to install and
highly polished for a very attractive finish.
Size is 1-3/4" x 1-1/4" #B1612 $11.95 |
 |
Stamped bright brass anchors
Anchor # 24747 is 1-3/4" h.
24747 Anchor 85 cents
24747 $7 / 10 |
 |
Brass Star
Brass star with fastening nail .
#62300 Size 1-1/4" 45 cents each
10 for $3.79
#62301 Size 3/4" 40 cents each 10 for 3.59 |
 |
Brass Fleur De Lis ornaments can be attached with
silicon.
#24518 Size 1-1/4" x 1" 55 cents
#24535 Size 1-3/4" x 1-1/8" 75 cents |
 |
Brass Grille Polished brass grille
feature intricate scroll work Size 1-3/4" x 5"
#24510 Grille $5.95 |
 |
Finely Detailed Brass Eagle Ornament
Size 2-1/8" w x 1-1/4" high. Apply with silicon adhesive.
Great decorative piece for plaques and boxes.
#62322 85 cents each
$7.50/10 |
 |
Large Detailed Eagle Ornament
Decorative eagle is very detailed and stamped from brass.
Size is 3-1/4" wide x 1-3/4" high. Supplied with fasteners.
#62320 $1.95 ea. $16.00/10 |
 |
Polished Brass Spire Finials
Elegant brass finials are typically used on clocks and furniture.
Precision brass turnings have a wood thread in the base for easy fastening
into wood.
#24404 Eagle/Ball size 4-1/4" x 1-7/8" $24.95
#24405 Ball/Spire size 4-1/4" x 1-7/8" $22.95
#24407 Ball/Spire size 3" x 1" $14.95 |
  |
Brass Urn Finials
Precision brass turnings have a wood thread in the base for easy fastening
into wood.
#24406 Urn 3" x 1-3/8" $19.95
#24400 Acorn 1-3/8" x 3/4" $3.25
#24409 Urn 3/4" x 3/8" $3.95 |
 |
Brass Plated Eagle Finial
Low cost dull brass plated eagle finial is 2" x2-1/4" wide.
Wood thread hander bolt on bottom for fastening.
#24403 Eagle Finial $4.75 |
 |
Box & Decorative Hardware
Decorative cast metal corners feature fine detail. imported from Germany or
Spain.
Light antique brass finish Scroll corner
measures 1-3/4" x 2-1/2"
#24503 $2.35 each |
 |
Antique brass finish Cherub corner.
Size 2" x 3"
#24501 $3.95 each |
 |
Antique brass finish windblowers.
Size 1-1/2" x 2-1/2"
#24502 $4.50 set |
 |
Antique brass finish Indian Head corner.
Size 2-3/8" x 3-1/2"
#24505 $2.95 each |
 |
Antique brass finish Indian Head corner.
Size 3-1/2" x 4-3/4"
#24506 $3.95 each |
 |
Bright Brass Stamped Corner
Size 2-3/4" x 3-3/4" w.
#24504 each 85 cents |
 |
Tempus Fugit Disc
Spun silver finish decorative disc, it is Latin for "time flies". Size 2-3/4"
#24500 $2.95 each |
 |
Polished Brass Key Plates
#24735 Round 1" dia.
#24734 Oval 1-1/8" x 1-1/2".
$1.50 each $11/10 |
 |
Surface mount lock is 1" x 1-3/4".
#24722 Lock Set $4.25 |
 |
Narrow Surface mount
cabinet lock is 13/16" x 2-3/4".
Ideal for clocks, curios.
#24711 Lock $5.25each $47.00/10 |
 |
Cam Lock
Cam lock is ideal for desk drawers and doors.. Passes stock to 7/8" thick.
Fits into 3/4" dia. mounting hole. Supplied with 2 keys and both straight
and offset catch.
#78023 Cam Lock $4.50 |
 |
Sliding Bolt Lock is surface mount. Long size is 6" x
1-1/4. #69000 $5.50 |
 |
Cheval mirror swivel hardware.
With insert, spacer rod and loop end.Size 3-1/4" long. Length can be cut.
Sold per pair.
#69001 Mirror Swivels $10.95 |
 |
Mirror Swivel Attach one member to side pillar
and one member to mirror frame. Size is 1-3/4" x 3/4" w x 1/2' thick. Will
leave 1/2" gap between frame and pillar.Set of 2 swivels/brackets. Screws
are not included. #77541 Swivel $11.95 |
 |
Attractive Mission Style hardware features a hammered
antique finish.
Usually high priced, we have located an affordable supplier of this classic
hardware.
Horizontal pull #B1111 $8.50 is 3-1/8" x 1-1/2".
Vertical pull #B1112 $7.75 is 1-1/4" x 3-3/4". |
 |
Decorative Brass Hooks for Coat & Hat Racks
Brass & Porcelain Coat Hook
Decorative and useful brass hook with white ceramic knobs for
coat and hat racks. Size 6" high. Bright brass.
#64000 Coat Hook $5.95 $20/4
|
 |
3 Ball Coat Hook
Decorative and useful brass hook , has 3 white ceramic knobs for
coats and hats. Size 6" high. Bright brass.
#64003 Coat Hook $9.95 ea. $32/4 |
 |
2 Knob Country Hook
Decorative hook with 2 ceramic knobs.
Size 5-1/2" high. Brass finish (not bright).
#64004 Hook $8.95 |
 |
Country Hook
Decorative antique hook with one ceramic knob.
Size 5" high. Dark antique finish.
#64006 County Hook $6.75 |
 |
Our clear glass restoration hardware knobs and
pull for vintage furniture are just what you need to complete your
restoration projects..Supplied with fastening screws.
Clear Glass Knobs
#B5201 dia. 1" $2.75
#B5202 dia. 1-1/4" $2.95
#B5203 dia. 1-1/2" $3.99 |
 |
Clear Glass Pull
#B5205 $8.75 center to center 3" |
Decorative Solid Brass Nautical Hardware
62101 $48.00
62202 $24.00
62100 $37.00
Solid brass portholes , are polished brass and decorative.
They are great for making clocks,
nautical projects, framing photos, making a mirror, or making decorative
projects.
Solid brass with a polished finish. #'s 62100 & 62101 feature hinged inner
flanges
that open with hold downs to secure them closed.
#62101 $48.00 size 11-1/2" OD x 7-1/2" ID
#62202 $24.00 size 11" x 13". 5-3/8" ID.
#62100 $37.00 size 8" OD x 5" ID.
Giant Carbon Paper
Engraved Personalized Nameplates
To easily trace patterns onto lumber, try using our large size carbon
paper. Our large format transfer paper is ideal for big projects, it can cover a
4x8 surface. Size 22 inches x 16 feet. #98011 Carbon
$5.95
Custom Engraved Brass Nameplates add a personal touch to your projects.
We have 2 sizes available, easily attached with included screws. Text is in
block capitals ,(except Handcrafted By / Handcrafted For which is script
).
The 1/2" x 3 inch plate is available with one line of text.
The 1" x 3 inch plate is available with 3 lines of text.
When ordering, please write out exactly what you want on each line.
Maximum of 26 characters/spaces per line.
One Liner Stock # 99995 $2.50 each
Three Liner Stock #99998 $4.95 each
|
