Lamp Parts

Lamp and electrical supplies for woodworking and ceramic crafts.
A large selection of lamp cord sets, wire harness, bulb sockets, lamp harps, threaded lamp pipe, straight brass lamp pipes, extensions, lamp nuts and fastening hardware are offered below.

Cord Set/Plug
Lamp cord set with attached plug is 8 feet long.
UL listed and polarized plug. Available in white or brown. Please Specify.
#40009 Cord Set/Plug $3.75 $30/10

Cord Set With Switch/Plug
Lamp cord set with inline on-off switch is 8 feet long.White.
#40023 Cord Set /Plug/Switch $4.75 $39/10

Cord Set/Switch/Socket/Plug
White 6 foot set has plug, switch and candelabra socket
with snap in socket. Fits 1" dia. hole.
#40051 Cord/Plug/Switch/Socket $3.95 $30/10

Cord Set/Switch/ 3 Sockets/ Plug
White 8 foot set has plug, switch and 3 candelabra sockets {6" spacing}.
Snap in hole sockets fit 1" diameter hole. Ideal for wood and ceramics.
#40049 Cord/Plug/Switch 3 Socket $7.25 $65/10

Bottle Lamp Kit
Easily turn your favorite bottle into a lamp with this kit.
As shown, it contains the side outlet socket, with wire plug set and the cork
for setting into neck of bottle. You may also want to order a shade adaptor as shown below.
#40097 Bottle Lamp Kit $7.25

Shade Adaptor
This shade adaptor simply clips on a standard bulb and
allows you to fasten a shade onto the threaded portion.
#40099 Shade Adaptor $1.75

Mason Jar Lamp Hardware Kit
Use this kit to transform your mason jar into a lamp.
You supply the mason jar, light bulb and shade ( you may need to also
order a shade adaptor shown above ) The lid and lamp hardware are brass finished.
#40098 Mason Lamp Kit $8.95

Candle / Lampost Kit
This kit contains a bulb and socket fastened into a plastic tube
that is prewired to a plug with an inline switch.
Often used in holiday candle and lamp post decorations.
#40094 Lamp Post Kit $6.95

Standard Socket
Brass finish standard light bulb socket.
UL Listed, max 660 watts.
#40025 Push Pull Socket $2.95 ea. $24/10

3 Way Socket
Brass finish standard socket for 3 way bulbs.
UL Listed, max 660 watts.
#40035 Socket 3 Way $3.50 ea. $29/10

Lamp Harps
These brass finish 2 piece lamp harps feature a removable base for lamp
assembly as well as a swivel tread top for fastening shades and finials.
Two sizes available
#40016 Size 8 Inch H $1.40 ea.
#40017 Size 11" H $1.65 ea.

Brass Finial
Brass finial is used on top of harp to hold shades.
#40018 Finial $1.25

A quick tip about lamp pipe hardware terms. The standard lamp pipe measures 3/8" outside diameter (OD).
This size lamp pipe is referred to in the industry as 1/8 IP. All our extensions: straight/offset as well as threaded
pipe measures 3/8" OD. For this hardware to pass through a hole in wood, the hole should be just slightly
larger than 3/8" diameter (7/16 or larger).

Brass Pltd Extensions
Smooth Brass plated lamp pipe extensions with threads at top and bottom.
3/8 inch diameter (OD) 1/8 IP. You can run lamp wire through these pipes.
#40090 size 5" $1.50
#40091 size 8" $1.85
#40092 size 11" $1.95
#40093 size 14" $2.25

Offset Lamp Pipe Extension
Brass plated offset lamp pipe extension has approx. 2-1/2" offset.
Use when designing your own table lamps etc.
Threaded at top and bottom to accept fastening washers,
nuts, sockets and harps. Hollow pipe allows lamp wire to pass through.
#40070 size 10" $2.50
#40071 size 15" $3.50

Two Piece Adjustable Extension for Lamps
This brass plated offset lamp extension is adjustable in height from 10" to 15".
Threaded top and bottom and includes nuts and washers for fastening.
Lamp cord can pass through the hollow pipe. The OD of the bottom pipe is 1/2".
#40069 Adjustable Offset $9.50

Threaded Lamp Pipe
All thread lamp pipe (nipple) is 3/8" OD.
#40081 Size 1" 15 cents
#40082 Size 2" 30 cents
#40086 Size 6" 75 cents
#40006 Size 12" $1.79
#40008 Size 36" $4.50
minimum shipping fee for 36" pipe is $7.95

Coupler
Use this internally threaded coupler to to join together lamp pipe
to make the desired length. The coupler is 7/16" OD x 7/8" long
#40080 Coupler 65 cents each

The assorted nuts fit the thread of lamp pipe (1/8IP) and the washers slip over the thread.
A Hex Nut #40015   10 cents each $7/100
B Knurled Nut #40079 1/2" Dia. 35 cents ea.   $22/100
B Knurled Nut #40078   3/4" Dia.   35 cents ea.   $27/100
C Palnut combo nut/washer #40077 15 cents ea.   $9/100
D Lock Washer #40074   5 cents ea.   $4/100
E Washer   Size 3/4" OD #40076 15 cents ea. $10/100
E Washer   Size   1"   OD #40075 15 cents ea. $10/100

Lamp Neck
Brass plated neck is ideal to cap off a turned wood or ceramic lamp.
It measures 1-1/2" w x 1" high. Hole allows lamp pipe to pass.
#40019 Lamp Neck $1.20

Custom Engraved Brass Nameplates
Add a personal touch to your projects with our custom engraved brass nameplates.
We have 2 sizes available, easily attached with included screws.
All text is in capitals and block letters,
except Handcrafted By or Handcrafted For which is in script.
The 1/2" x 3 inch plate is available with one line of text.
The 1" x 3 inch plate is available with 3 lines of text.
When ordering, please write out exactly what you want on each line.
Maximum of 26 characters/spaces per line.

Giant Carbon Paper
To easily trace patterns onto lumber, try using carbon paper.
Our large format paper is 22 inches x 16 feet.
#98011 Carbon $5.95